BLUETTI Apex 300 vs. Jackery HomePower 3000
As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.
Top picks at a glance
Best for 240V and add-on batteriesBLUETTI Apex 300Check price on Amazon
Best all-in-one 3 kWh boxJackery HomePower 3000Check price on Amazon
Buy the BLUETTI Apex 300 if you need 240V power or want to add batteries later. Buy the Jackery HomePower 3000 if you want about 3 kWh in one finished box: it holds 3,072 Wh, weighs 59.52 lb, and has its USB ports built in.
We put this matchup together from BLUETTI’s and Jackery’s own US spec pages as they read in November 2026. Neither station has been in our hands, so treat this as a paper comparison of the numbers each maker publishes.
Who should pick the BLUETTI Apex 300?
Who it's for: Home backup and RV owners who want 240V output, a 50 A RV outlet, and room to add batteries.
Strengths
- 120/240V output through a NEMA 14-50R outlet
- Expands with up to 6 B300K batteries
- Two solar inputs, 2,400 W in total
Weaknesses
- USB and DC ports need the separate Hub D1
- Heavy at 83.78 lb
The Apex 300 is built for a house or RV that needs heavy circuits. Its NEMA 14-50R outlet gives 120/240V at 50 A, and a TT-30R outlet handles a standard 30 A RV hookup. Four 20 A outlets sit beside them. Total output is 3,840 W, and BLUETTI’s lifting mode reaches 7,680 W.
It also refills fast. Two solar inputs take 1,200 W each, for 2,400 W in total. Turbo Charging, at up to 3,840 W, brings it to 80% in about 45 minutes, by BLUETTI’s rating. Each unit links to up to six B300K, B300S, or B300 batteries, so its 2,764.8 Wh is a starting point, not a ceiling. The cells are rated for 6,000+ cycles to 80% of their original capacity, and the warranty runs 5 years.
The trade-offs are real. Its USB-C, USB-A, car, DC5521, and Anderson ports only work with the separate Hub D1, and that hub is rated at 700 W. Out of the box, it holds less energy than the Jackery. At 83.78 lb, it is a station you place once and leave.
Who should pick the Jackery HomePower 3000?
Who it's for: Home backup buyers who want 3 kWh and a 30 A outlet without adding battery packs.
Strengths
- 3,072 Wh at 59.52 lb
- 3,600 W output, 7,200 W surge
- 30 A outlet rated 3,600 W
Weaknesses
- Can't add expansion batteries
- AC charging takes 2.2 hours
- Bypass mode limited to 1,440 W
The HomePower 3000 suits a buyer who wants a complete 3 kWh backup with nothing extra to buy. Its 3,072 Wh battery feeds 3,600 W of output with a 7,200 W surge peak. Four 120 V 20 A outlets share 2,400 W, and a 120 V 30 A outlet, a TT-30 RV port per Jackery’s Amazon listing photo, can carry the full 3,600 W.
Two USB-C ports at 100 W, two USB-A ports at 18 W, and a 12 V car outlet are part of the box. A wall outlet fills it in 2.2 hours, and it switches to battery within 20 ms if the grid drops. Jackery lists a 3+2 year warranty, or 5 years when bought from Jackery.com.
Its limits come from that fixed design. Jackery says it can’t connect extra batteries, so 3,072 Wh is all you get. Solar input tops out at 1,000 W through two 8 mm ports, less than half of the Apex 300’s. Bypass mode is capped at 1,440 W, and the cycle rating is 4,000 cycles to 70%+, a lower bar than the Apex 300’s.
Apex 300 vs. HomePower 3000: the key specs
| BLUETTI Apex 300 | Jackery HomePower 3000 | |
|---|---|---|
| Capacity | 2,764.8 Wh | 3,072 Wh |
| Total AC output | 3,840 W | 3,600 W |
| Peak rating | 7,680 W lifting power | 7,200 W surge |
| 120/240V outlet | NEMA 14-50R | Not listed |
| 30 A RV outlet | TT-30R | TT-30 |
| Solar input | 2,400 W | 1,000 W |
| USB ports | Need the Hub D1 | Built in |
| Cycle rating | 6,000+ to 80% | 4,000 to 70%+ |
| Extra batteries | Up to 6 | None |
| Weight | 83.78 lb | 59.52 lb |
| Warranty | 5 years | 3+2 years |
What does the extra weight buy you?
The Apex 300 is the heavier station but holds less energy, so the Jackery wins on energy per pound: about 51.6 Wh per pound, against about 33.0 Wh for the BLUETTI. What the Apex 300’s weight pays for is 240V output, faster solar, and expansion.
For runtime, we assume 85% of each listed capacity actually reaches your devices after conversion losses.
| Apex 300 | HomePower 3000 | |
|---|---|---|
| Usable energy at 85% | 2,350.08 Wh | 2,611.2 Wh |
| Hours at a steady 300 W | about 7.8 | about 8.7 |
On a single charge, the HomePower 3000 runs a 300 W load close to an hour longer. Add even one battery to the Apex 300 and that gap reverses, since the Jackery can’t grow.
How to choose
- You need 240V or a 50 A RV inlet: only the Apex 300 lists it.
- You want to start small and add capacity: the Apex 300 takes up to six batteries.
- You want USB ports without buying a hub: the HomePower 3000 has them built in.
- You’ll move the station between rooms: the HomePower 3000 is about 24 lb lighter.
- You rely on solar: the Apex 300’s 2,400 W input refills far faster than the Jackery’s 1,000 W.
Check the nameplate of each appliance you plan to run and compare it with the station’s rated and surge output before you buy.
FAQ
Does the BLUETTI Apex 300 have USB ports built in?
No. BLUETTI lists the Apex 300’s USB-C, USB-A, car, DC5521, and Anderson ports on the separate Hub D1, which is rated at 700 W. The station itself has AC outlets only.
Can the Jackery HomePower 3000 run 240V appliances?
Jackery doesn’t list 240V output for the HomePower 3000. Its outlets are 120 V: four 20 A outlets and one 30 A TT-30 outlet. For 240V, the BLUETTI Apex 300 lists a NEMA 14-50R outlet.
Which of these two stations recharges faster from solar?
The BLUETTI Apex 300 accepts up to 2,400 W of solar through two inputs. The Jackery HomePower 3000 accepts up to 1,000 W, so the Apex 300 can take in more than twice as much panel power.
How long will each one run a 300 W load?
Assuming 85% of the listed capacity reaches your devices, the HomePower 3000 runs a steady 300 W load for about 8.7 hours and the Apex 300 for about 7.8 hours on one charge.




